INDUSTRIAL WATER TREATMENT ›› 2012, Vol. 32 ›› Issue (2): 63-65. doi: 10.11894/1005-829x.2012.28(2).63

Previous Articles     Next Articles

Research on corrosion inhibitor in desalination water and its application

Liu Wei1, Gao Xi1, Guo Meng1, Li Duomei2, Gao Fengjiang2, Zhang Kemin2   

  1. 1. CNOOC Tianjin Chemical Research & Design Institute,Tianjin 300131,China;
    2. PetroChina Jilin Oilfield Co.,Songyuan 138000,China
  • Received:2011-10-13 Online:2012-02-20 Published:2012-02-27

海水淡化水缓蚀剂的研究及应用

刘伟1, 高溪1, 郭猛1, 李多梅2, 高峰江2, 张克敏2   

  1. 1 中海油天津化工研究设计院;
    2 中石油吉林油田公司
  • 作者简介:刘伟(1982-),2009年毕业于大连理工大学,硕士.电话:13820264706,E-mail:kangliu1314@163.com.

Abstract:

The corrosion inhibition effects of seven kinds of corrosion inhibitors in desalinated seawater,under the following conditions: low-alkalinity,low hardness,and high chlorine ions,on carbon steel,brass and stainless steel have been contrasted.The results show that 80 mg/L of TS-528G in desalinated seawater has petty good corrosion inhibition effect on carbon steel,brass,and stainless steel.Running for 20 d,the corrosion rate of carbon steel is 0.027 mm/a,that of brass 0.002 2 mm/a,and that of stainless steel 0.002 5 mm/a.TS-528G has been used for the circulating cooling water system at a chemical plant in Dagang,Tianjin.After running for 7 months,the corrosion rate of carbon steel is 0.05 mm/a,those of brass and stainless steel are 0.004 mm/a.

Key words: corrosion inhibitor, desalination water, corrosion rate

摘要:

对比了7种缓蚀剂在低碱、低硬、高氯离子的海水淡化水中对碳钢、黄铜、不锈钢的缓蚀性能。结果表明:80 mg/L的TS-528G在海水淡化水中对碳钢、黄铜、不锈钢有良好的缓蚀效果,运行20 d碳钢的腐蚀率为0.027mm/a,黄铜的腐蚀率为0.002 2 mm/a,不锈钢的腐蚀率为0.002 5 mm/a。将TS-528G应用于天津大港某化工厂循环冷却水系统,运行7个月碳钢的腐蚀率<0.05 mm/a,黄铜、不锈钢的腐蚀率<0.004 mm/a。

关键词: 缓蚀剂, 海水淡化水, 腐蚀率

CLC Number: