INDUSTRIAL WATER TREATMENT ›› 2001, Vol. 21 ›› Issue (5): 9-11. doi: 10.11894/1005-829x.2001.22.(5).9

Previous Articles     Next Articles

Study on the color removal from polluted water sources by biopretreatment with elastic packing and micropore aerator

XIAO Yutang1, WU Ming1, XU Jianhua2   

  1. 1. Wastewater Treatment Engineering Group, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian 116023;
    2. School of Environmental Science and Engineering, Tongji University, Shanghai 200092, China
  • Received:2000-12-04 Online:2001-05-20 Published:2010-10-01

生物预处理净水工艺除色度生产应用研究

肖羽堂1, 吴鸣1, 许建华2   

  1. 1. 中国科学院大连化学物理研究所,辽宁大连 ;
    2. 同济大学环境科学与工程学院,上海 200092
  • 作者简介:肖羽堂(1966- ),同济大学环境工程学院博士,现为中国科学院大连化学物理研究所环境工程研究室博士后。电话:(0411)4671991-736;E-mail:ytxiao@dicp.ac.cn;ytxiao@hotmail.com。
  • 基金资助:

    国家“九五”重点科技攻关项目 项目编号 ( 1996-909-03-01-02);中国博士后科学基金资助

Abstract:

The effect of color removal on the polluted raw water of water sources by the biopretreatment action of biocontact oxidation process with the elastic packing and micropore aerator has been studied. The research results show that the water purification biopretreatment can reach a color removal efficiency of 19%~43% for the raw water of water sources under the conditions of normal temperature 20~28 ℃,CODMn in polluted water sources 6~11 mg/L,chromaticity 30~40,the running parameters for the water purification biopretreatment HRT 1.4 h,gas∶water ratio 0.5∶1,and DO 7~9 mg/L. And the water purification biopretreatment can reach a color removal efficiency of 13%~22% for the raw water of water sources under lower water temperature 7~16 ℃,CODMn in polluted water sources 6~10 mg/L,chromaticity 32~35,the running parameters for the water purification biopretreatment of purified water HRT 1.4 h,gas∶water 0.5∶1,and DO 8~10 mg/L.

Key words: biopretreatment, polluted water sources, biocontact oxidation, chromaticity, water purification

摘要:

采用生物接触氧化预处理净水工艺对受污染的水源原水进行了除色度效果研究。结果表明:在正常水温20~28℃的条件下,当污染水源CODMn为 6~11mg/L,色度为30~40度和生物预处理净水工艺运行参数HRT为 1.4h,气∶水为 0.5∶1,DO为7~9mg/L时,生物预处理净水工艺对水源原水的脱色率为19%~43% ;在较低水温 7~ 16℃的条件下,当污染水源CODMn为 6~10mg/L,色度为 32~35度和生物预处理净水工艺运行参数HRT为 1.4h,气∶水为0.5∶1,DO为 8~ 10mg/L时,生物预处理净水工艺可去除水源原水中的色度为 13%~22%。

关键词: 预处理, 污染水源, 色度, 生物接触氧化, 净水工艺

CLC Number: